Weekly electronics meeting Monday 4 pm room 316
Signals from the cathode pads are processed by a readout element containing a preamplifier and shaper based on this conceptual diagram:
The analog processors, developed by IDE AS, Norway, have the following features:
- low noise analog readout with an equivalent noise charge lower than 200 electrons for input capacitance smaller or equal to 10 pF.
- input protection against sparking.
- high dynamic range: the readout chain has linear response for input charge up to +/-500,000 electron input charge.
- programmable peaking time in the range of 1 to 3 microseconds.
- 64 processing channel/chip featuring both serial output with a differential buffer connected sequentially to each readout channel and parallel output with baseline subtraction, which allows digitization at the front end level with a chip ADC combined with this device.
The fine segmentation of the cathode pad readout requires the implementation
with microelectronics technology (VLSI chip). We have a total of approximately 230,000
readout channels divided into 30 detector sectors. Each sector is subdivided
into 12 readout segments connected via ribbon cable to the data boards located
in front end crates.
The VA_RICH chip mounted on a hybrid board:
Electronic system development:
For more information on analog issues associated with VA_RICH readout click here.
For more information on DAQ group effort on RICH DATABOARD click here.
Back
Information or comments on this page can be sent to Marina Artuso
artuso@suhep.phy.syr.edu
Last updated: 24-Febr-1997